Sip Authentication; Sip Uri; Sip Source Port - Panasonic KX-UDS124 Administrator's Manual

2.5.3 SIP Settings - PS [Line 1–2]

SIP URI

Description
Value Range
Default Value

2.5.3.3 SIP Authentication

Authentication ID
Description
Value Range
Default Value
Authentication Password
Description
Value Range
Default Value

2.5.3.4 SIP Source Port

Source Port
Description
Value Range
Default Value
104 Administrator Guide
Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com".
Note
•
When registering using a user ID that is not a phone number,
you should use this setting.
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
Max. 195 characters
Not stored.
Specifies the authentication ID of the S-PS that is registered to the
SIP-CS.
Max. 127 characters
Not stored.
Specifies the authentication password of the S-PS that is registered to
the SIP-CS.
Max. 127 characters
Not stored.
Specifies the source port number of the S-PS that is registered to the
SIP-CS.
1024–49151
•
PS1 Line1: 5061
•
PS1 Line2: 5062
•
PS2 Line1: 5063...
Note
•
The default value increases by 1 for each line.
Document Version 2013-03