General Information On The Configuration Files; Configuration File Parameters - Panasonic KX-UDS124 Administrator's Manual

4.1.1 Configuration File Parameters

4.1 General Information on the Configuration Files

4.1.1 Configuration File Parameters
The information on each parameter that can be written in a configuration file is shown in the tables in this
section. The information includes parameter name (as the title of the table), value format, description, permitted
value range, and the default value of each parameter. For details about corresponding Web user interface
settings, see 2.1.3 Web User Interface Setting List.
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Note
•
Certain parameter names end with suffixes indicating their type, as shown in the table below:
System setting
SIP-CS setting
S-PS setting
S-PS setting per line
•
"x" refers a number within the setting, for example, a button number.
•
"y" refers to the S-PS number (1–255).
•
"n" refers to the line number (S-PS: 1–2).
Value Format
Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite
form such as "Comma-separated Integer" or "Comma-separated String".
•
Integer: a numerical value, described as a sequence of numerical characters, optionally preceded by a
"-" (minus)
An empty string is not allowed.
•
Boolean: "Y" or "N" ("Yes" or "No" also are allowed.)
•
String: sequence of alphanumerical characters
For details about available characters, see 4.1.2 Characters Available for String Values.
•
Comma-separated Integer: a list of integers, separated by commas
No space characters are allowed.
•
Comma-separated String: a list of strings, separated by commas
No space characters are allowed.
Description
Describes the details of the parameter.
Value Range
Indicates the permitted value range of the parameter.
Default Value
Indicates the factory default value of the parameter.
Actual default values may vary depending on your dealer.
166 Administrator Guide
Type of Setting Parameter Name
"..." or "...x"
"..._CS" or "...x_CS"
"..._PSy" or "...x_PSy"
"..._PSy_n"
Document Version 2013-03