Auto_Call_Hold - Panasonic KX-UDS124 Administrator's Manual

Description
Value Range
Default Value

AUTO_CALL_HOLD

Value Format
Description
Value Range
Default Value
DISCONNECTION_MODE
Value Format
Description
Value Range
Default Value
TONE_LEN_DISCONNECT_HANDSFREE
Value Format
Description
Value Range
Default Value
4.4.2 Tone Settings
DIAL_TONE1_FRQ
Value Format
Description
Document Version 2013-03
Specifies the duration of the hold recall timer. If set to "0", the function
is disabled.
0–240 (0: Disable)
60
Boolean
Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
•
Y (Enable Auto Call Hold)
•
N (Disable Auto Call Hold)
N
Integer
Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
1–2
–
1: Mode1 (ROT)
–
2: Mode2 (BT)
1
Integer
Specifies the duration, in seconds, that a disconnect tone will be heard
when the other party ends a call. This setting applies to both Receiver
mode and Hands-free mode.
1–15
3
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of Dial Tone 1 using 2
whole numbers separated by a comma.
4.4.2 Tone Settings
Administrator Guide 197