9.1 Resetting to Factory Default
9.1 Resetting to Factory Default
This procedure resets all settings in the SIP-CS to their factory defaults.
This type of initialization also deletes all other data on the SIP-CS, such as the call logs and the phonebook.
To perform this initialization, follow the procedure below:
1.
Press the RESET switch on the back of the SIP-CS for about 10 seconds.
Notice
•
After performing this procedure, the SIP-CS will restart automatically. To avoid problems, it is
recommended that you save your settings beforehand.
276
Administrator Guide
RESET Switch
Document Version 2013-03