2.4.3 Change User Password
Value Range
Default Value
Phone Number
Description
Value Range
Default Value
2.4.3.2 Changing User Password
This screen will be displayed by clicking [Change User Password] under [Select Button] on the [Change
User Password] screen. You can change the password used to authenticate the User account on this screen.
Note
•
Although this setting is technically possible, you cannot log in to the Web user interface with the User
account.
2.4.3.3 PS Name
PS Name
Description
Value Range
Default Value
2.4.3.4 Change User Password
New Password
Description
Value Range
Default Value
74
Administrator Guide
Max. 20 characters
Not applicable.
Indicates the currently assigned phone numbers (reference only).
Note
•
Indicates both lines if the SIP-CS is connected in general SIP
Server.
Max. 32 digits
Not applicable.
Indicates the currently assigned name of the S-PS (reference only).
Max. 20 characters
Not applicable.
Specifies the new password to use to authenticate the User account for
Web user interface programming.
6–16 characters (except ", &, ', :, <, >, and space)
Not stored.
Document Version 2013-03