Rtp_Ptime - Panasonic KX-UDS124 Administrator's Manual

4.5.2 RTP Settings

RTP_PTIME

Value Format
Description
Value Range
Default Value
RTCP_ENABLE
Value Format
Description
Value Range
Default Value
RTCP_SEND_BY_SDP
Value Format
Description
Value Range
Default Value
RTP_CLOSE_ENABLE
Value Format
Description
Value Range
Default Value
214 Administrator Guide
Integer
Specifies the interval, in milliseconds, between transmissions of RTP
packets.
•
20
•
30
•
40
20
Boolean
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
Integer
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in "RTCP_INTVL",
if the "RTCP_ENABLE" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
Boolean
Specifies whether to enable processing to close held RTP sockets.
•
Y (Enable RTP Close)
•
N (Disable RTP Close)
Y
Document Version 2013-03