Fwd_Dnd_Synchro_Enable_Psy_N - Panasonic KX-UDS124 Administrator's Manual

FWD_DND_SYNCHRO_ENABLE_PSy_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
CW_ENABLE_PSy_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
RETURN_VOL_SET_DEFAULT_ENABLE
Value Format
Description
Value Range
Document Version 2013-03
FWD_DND_SYNCHRO_ENABLE_PS1_1,
FWD_DND_SYNCHRO_ENABLE_PS1_2,
FWD_DND_SYNCHRO_ENABLE_PS2_1,
FWD_DND_SYNCHRO_ENABLE_PS2_2,
:
FWD_DND_SYNCHRO_ENABLE_PS255_1,
FWD_DND_SYNCHRO_ENABLE_PS255_2
Boolean
Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface, between the SIP-CS
and the portal server that is provided by your dealer.
Note
•
Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your dealer.
•
You cannot set both "SHARED_CALL_ENABLE_PSy_n" and
"FWD_DND_SYNCHRO_ENABLE_PSy_n" to "Y" at the same
time.
•
Y (Enable Do Not Disturb/Call Forward synchronization)
•
N (Disable Do Not Disturb/Call Forward synchronization)
N
CW_ENABLE_PS1_1, CW_ENABLE_PS1_2,
CW_ENABLE_PS2_1, CW_ENABLE_PS2_2,
:
CW_ENABLE_PS255_1, CW_ENABLE_PS255_2
Boolean
Specifies whether automatic call waiting is enabled.
•
Y (Enable Call Waiting)
•
N (Disable Call Waiting)
Y
Boolean
Specifies whether the volume is returned to its default setting after each
call.
•
Y (Volume returns to the default setting after each call)
•
N (Volume does not change after each call)
4.6.1 Call Control Settings
Administrator Guide 219