Provisioning; What Is Provisioning; Protocols For Provisioning; Configuration File - Panasonic KX-UDS124 Administrator's Manual

3.2.3 Configuration File

3.2 Provisioning

3.2.1 What is Provisioning?

After pre-provisioning has been performed (® see 3.1 Pre-provisioning), you can set up the SIP-CS
automatically by downloading the configuration file stored on the provisioning server into the SIP-CS. This is
called "provisioning".
Dealer
Provisioning
Pre-provisioning data
Factory defaults

3.2.2 Protocols for Provisioning

Provisioning can be performed over HTTP, HTTPS, FTP, and TFTP. The protocol you should use differs
depending on how you will perform provisioning. Normally, HTTP, HTTPS, or FTP is used for provisioning. If
you are transmitting encrypted configuration files, it is recommended that you use HTTP. If you are transmitting
unencrypted configuration files, it is recommended that you use HTTPS. You may not be able to use FTP
depending on the conditions of the network router or the network to be used.
3.2.3 Configuration File
This section gives concrete examples of the functions of the configuration file and how to manage it.
The configuration file is a text file that contains the various settings that are necessary for operating the SIP-CS.
The files are normally stored on a server maintained by your dealer, and will be downloaded to the SIP-CSs
as required. All configurable settings can be specified in the configuration file. You can ignore settings that
already have the desired values. Only change parameters as necessary.
For details about setting parameters and their descriptions, see Section 4 Configuration File
Programming.
152 Administrator Guide
End user
User
configuration
User modified data
Provisioning data
Pre-provisioning data
Factory defaults
Document Version 2013-03