Web User Interface Setting List - Panasonic KX-UDS124 Administrator's Manual

Cell station unit (sip)
Hide thumbs Also See for KX-UDS124:
Table of Contents

Advertisement

[Example]
2.
Open your Web browser, and then enter "http://" followed by the SIP-CS's IP address into the address field
of your browser.
3.
Log in to the SIP-CS as the administrator.
Note
The default ID and password for the administrator are as follows:
ID: admin
Password: adminpass
4.
The Web user interface window is displayed. Configure the settings for the SIP-CS as desired.
5.
You can log out from the Web user interface at any time by clicking [Web Port Close].

2.1.3 Web User Interface Setting List

The following tables show all the settings that you can configure from the Web user interface. For details about
each setting, see the reference pages listed.
IMPORTANT
Please note that all screens are available when accessing the Web user interface for a Super Master CS.
However, some screens are not available when accessing the Web user interface for an Air Sync Master
CS or a Slave CS.
Status
Version Information
Section Title
CS Version Information
PS Version Information
(Model 1)
PS Version Information
(Model 2)
PS Version Information
(Model 3)
Document Version 2013-03
Web User Interface
Setting
Model
Operating Bank
IPL Version
Firmware Version
Model
Firmware Version
Model
Firmware Version
Model
Firmware Version
2.1.3 Web User Interface Setting List
Configuration File Parameter
Ref.
Parameter Name
(Page)
50
50
51
51
51
51
51
51
52
52
Ref.
(Page)
Administrator Guide
25

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents