Http_Ssl_Verify - Panasonic KX-UDS124 Administrator's Manual

4.3.4 HTTP Settings

HTTP_SSL_VERIFY

Value Format
Description
Value Range
Default Value
CFG_ROOT_CERTIFICATE_PATH
Value Format
Description
Value Range
Default Value
192 Administrator Guide
Integer
Specifies whether to enable the verification of the root certificate.
•
0 (No verification of root certificate)
•
1 (Simple verification of root certificate)
•
2 (Precise verification of root certificate)
Note
•
If set to "0", the verification of the root certificate is disabled.
•
If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate's date, certificate's chain,
and the confirmation of the root certificate will be verified.
•
If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
•
If the SIP-CS has not obtained the current time, verification will
not be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
0
String
Specifies the URI of the root certificate.
Note
•
Changing this setting may require restarting the SIP-CS.
Max. 500 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 128 characters.
–
"<password>" must be less than 128 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
Empty string
Document Version 2013-03