Value Range
Default Value
2.5.4.7 CODEC Preferences
G722 (Enable)
Description
Value Range
Default Value
G722 (Priority)
Description
Value Range
Default Value
PCMA (Enable)
Description
Value Range
Default Value
PCMA (Priority)
Description
Value Range
Default Value
Document Version 2013-03
•
Yes
•
No
Note
•
If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Yes
Selects whether to enable the G.722 codec for voice data transmission.
•
Yes
•
No
Yes
Specifies the numerical order usage priority for the G.722 codec.
1–255
1
Selects whether to enable the PCMA codec for voice data transmission.
•
Yes
•
No
Yes
Specifies the numerical order usage priority for the PCMA codec.
1–255
1
2.5.4 VoIP Settings
Administrator Guide
109