Epson Stylus Pro 3800 Service Manual page 104

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.3.9 HOUSING, RIGHT
Do not remove or install the HOUSING, RIGHT roughly, or the
C A U T I O N
hooks and the tabs on the HOUSING, RIGHT may be damaged or
broken.
1. Remove the HOUSING, REAR, ASSY.
2. Remove the HOUSING, FRONT, RIGHT.
3. Hold the front part of the HOUSING, RIGHT and slightly lift it to release the tabs
(A, B) on the upper part of the Housing and the hook (C) in the Housing as shown
in Figure 4-15, and remove the HOUSING, RIGHT.
Be sure to engage the lower hook (C) with the tab on the main unit
first, then engage the tabs (A, B) pulling the upper part of the
HOUSING, RIGHT upward.
DISASSEMBLY & ASSEMBLY
(p96)
(p99)
Disassembly/Assembly Procedure (Group 1)
A
C
Inside the HOUSING
Figure 4-15. Removing the HOUSING, RIGHT
Revision C
B
HOUSING, RIGHT
104