Epson Stylus Pro 3800 Service Manual page 166

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
3. Slide the INK WASTE BOX to the left and release it from the tab of the main
frame, and remove the INK WASTE BOX.
Align the two guide pins and one positioning groove of the INK
WASTE BOX with the two positioning holes and one hooked tab of
the main frame to secure the INK WASTE BOX.
Left side
Engage the hooked
tab with the groove.
INK WASTE BOX
4. Remove the POROUS PAD, INK WASTE BOX, RIGHT and the POROUS PAD,
INK WASTE BOX, LEFT from the INK WASTE BOX.
Whenever the POROUS PAD, INK WASTE BOX RIGHT/LEFT
A D J U S T M E N T
R E Q U I R E D
are replaced, the corresponding adjustments must be carried out.
See Chapter 5 "ADJUSTMENT"
<Adjustment Item>
1. Reset When Borderless Absorber Change
DISASSEMBLY & ASSEMBLY
See Figure 4-95.
positioning point
positioning point
See Figure 4-96.
(p208).
Disassembly/Assembly Procedure (Group 1)
Right side
INK WASTE BOX
POROUS PAD, INK WASTE BOX, RIGHT
INK WASTE BOX
Figure 4-96. Removing the POROUS PAD, INK WASTE BOX, RIGHT/LEFT
Figure 4-95. Removing the INK WASTE BOX
POROUS PAD, INK WASTE BOX, LEFT
Revision C
166