Epson Stylus Pro 3800 Service Manual page 127

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4. Release the cables of the LOCK, COVER, ASSY. from the two cable hooks.
See Figure 4-47.
5. Pull out the BASE, ENCLOSURE.
6. Release CN44 and CN51 connectors of the LOCK, COVER, ASSY. on the
BOARD ASSY., MAIN. See Figure 4-29.
7. Peel off the acetate tapes on the COVER, ENCLOSURE, ASSY. to release the
cables of the LOCK, COVER, ASSY., and remove the LOCK, COVER, ASSY.
See Figure 4-48.
Route the cables of the LOCK, COVER, ASSY., with other cables
and secure them with the acetate tapes as shown in
DISASSEMBLY & ASSEMBLY
(p111)
Figure 4-48.
Disassembly/Assembly Procedure (Group 1)
Left rear side of the printer
Figure 4-47. Releasing the LOCK, COVER, ASSY. Cables (1)
Left rear side of the printer
acetate tapes
COVER, ENCLOSURE, ASSY.
Figure 4-48. Releasing the LOCK, COVER, ASSY. Cables (2)
Revision C
cable hooks
127