Epson Stylus Pro 3800 Service Manual page 155

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
8. Remove the three screws that secure the FRAME, HOLDER, IC, ASSY.
Three C.B.S. 3 x 6 screws (9 ± 1 kgf.cm)
9. Use a precision screwdriver or a similar tool to pull out the guide pin of the
HOLDER, TUBE from the FRAME, TOP, ASSY., and release the HOLDER,
TUBE.
DISASSEMBLY & ASSEMBLY
Figure 4-82. Removing the screws from the FRAME, HOLDER, IC, ASSY.
Disassembly/Assembly Procedure (Group 1)
C.B.S. 3x6
FRAME, TOP,
ASSY.
FRAME, HOLDER, IC, ASSY.
Left side of the printer
C.B.S. 3x6
Revision C
HOLDER, TUBE
guide pin
C.B.S. 3x6
155