Epson Stylus Pro 3800 Service Manual page 136

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
6. Pull out the STACKER, ASSY. toward you as far as it will go.
7. Lift up the STACKER, ASSY. to disengage its right dowel from the main unit while slightly pushing the STACKER, ASSY. leftward. Then disengage the left dowel from the
main unit to remove the STACKER, ASSY.
If the GUIDE, STACKER, LEFT/RIGHT fall off unintentionally
while removing the STACKER, ASSY, reinstall them referring to
"Reassembly" (p137).
GUIDE, STACKER, LEFT
DISASSEMBLY & ASSEMBLY
STACKER, ASSY.
Figure 4-58. Removing the STACKER, ASSY.
Disassembly/Assembly Procedure (Group 1)
Revision C
GUIDE, STACKER, RIGHT
136