Printer Mechanism - Epson Stylus Pro 3800 Service Manual

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890

4.3.12 PRINTER MECHANISM

4.3.12.1 Replacing the PRINTER MECHANISM
Name: PRINTER MECHANISM, ASP
1. Remove the parts listed below from the old printer, and install them to the
PRINTER MECHANISM, ASP except for the consumables.
Consumable goods (Ink cartridge, Maintenance cartridge)
BOARD ASSY., MAIN
PAPER, SUPPORT, MANUAL, ASSY.
PAPER, SUPPORT, ASSY.
STACKER, C
When the PRINTER MECHANISM, ASP needs to be replaced due
C H E C K
P O I N T to a failure of the BOARD ASSY., MAIN, the BOARD ASSY.,
MAIN also must be replaced with a new one.
2. A CD-ROM that contains mechanism parameter data comes with the PRINTER
MECHANISM, ASP. Load the CD-ROM into to the PC.
3. Start up the Adjustment program.
"NVRAM Backup utility" will automatically start up when the Adjustment
program is started. Using the utility, write the mechanism parameter data into the
PRINTER MECHANISM, ASP. See Chapter 5 "5.3.6 Parameter Backup"
231) for the operation instructions.
DISASSEMBLY & ASSEMBLY
(Page
Disassembly/Assembly Procedure (Group 1)
Revision C
196