Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.9.4 POROUS PAD, TRAY, INK EJECT
1.
Remove the HOUSING, UPPER.
2.
Remove the INK, SYSTEM, ASSY.
3.
Remove the POROUS PAD, TRAY, INK EJECT from the TRAY, INK EJECT.
Whenever the POROUS PAD, TRAY, INK EJECT is replaced, the
A D J U S T M E N T
R E Q U I R E D
corresponding adjustments must be carried out. See Chapter 5
"ADJUSTMENT"
(p208).
<Adjustment Item>
1.
Reset When Ink Holder Waste Absorber Change
DISASSEMBLY & ASSEMBLY
(p107)
(p153)
Disassembly/Assembly Procedure (Group 1)
TRAY, INK EJECT
POROUS PAD, TRAY, INK EJECT
Figure 4-88. Removing the POROUS PAD, TRAY, INK EJECT
Revision C
160