Print Head - Epson Stylus Pro 3800 Service Manual

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890

4.3.9.5 PRINT HEAD

Since the PRINT HEAD of Epson Stylus Pro 3800/3800C/3850 and
C A U T I O N
Epson Stylus Pro 3880/3885/3890 has no compatibility, be careful
not to install the wrong one.
1. Remove the HOUSING, UPPER.
2. Remove the COVER, CR. (p152)
3. Perform step 13. to step 16. in "4.3.9.3 INK, SYSTEM, ASSY." (p153)
the SELECTOR, INK, ASSY. from the CARRIAGE, ASSY.
4. Remove the screw that secures the MOUNTING PLATE, SELECT, INK and
remove it. See Figure 4-89.
One C.B.P. 2.5 x 8 screw (3 ± 1 kgf.cm)
Insert the rib of the PRINT HEAD into the cutout of the
MOUNTING PLATE, SELECT, INK to secure the MOUNTING
PLATE, SELECT, INK.
DISASSEMBLY & ASSEMBLY
(p107)
to remove
Disassembly/Assembly Procedure (Group 1)
positioning point
C.B.P. 2.5x8
MOUNTING PLATE,SELECT,INK
Figure 4-89. Removing the MOUNTING PLATE, SElECT, INK
Revision C
161