Epson Stylus Pro 3800 Service Manual page 175

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
7. Align the fold line of the SHEET, GUIDE, TUBE with that of the CABLE ASSY.,
ASP, and secure them with double-sided tape.
8. Insert the SELECTOR, INK, ASSY into the CARRIAGE, ASSY, and secure it
with the two screws.
One C.B.P. 2.5 x 8 screw (2 ± 0.5 kgf.cm)
One C.B.S. 2.5 x 4 screw (2 ± 0.5 kgf.cm)
When installing the SELECTOR, INK, ASSY., make sure not to
C A U T I O N
mix up the C.B.P. 2.5 x 8 screw and the C.B.P. 2.5 x 4 screw as they
are similar to each other.
DISASSEMBLY & ASSEMBLY
SHEET, GUIDE, TUBE
Disassembly/Assembly Procedure (Group 1)
Fold line
Figure 4-110. Attaching the SHEET, GUIDE, TUBE
BOARD ASSY., SUB
SELECTOR, INK, ASSY
C.B.S. 2.5x4
Figure 4-111. Installing the SELECTOR, INK, ASSY
Revision C
Double-sided tape
C.B.P. 2.5x8
175