Epson Stylus Pro 3800 Service Manual page 139

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
STACKER, ASSY.
1. While pressing the stopper of the STACKER, ASSY., put the dowels of the left
rear and right rear of the STACKER, ASSY. into the slits of the rear of the
GUIDE, STACKER, LEFT and GUIDE, STACKER, RIGHT.
2. Put the dowels of the left front and right front of the STACKER ASSY. into the
slits of the front of the GUIDE, STACKER, LEFT and GUIDE, STACKER,
RIGHT.
Left rear
stopper
Left front
GUIDE, STACKER, LEFT
DISASSEMBLY & ASSEMBLY
3. Push in the STACKER, ASSY. to the end.
4. Secure the left and right of the PLATE, STOPPER, STACKER with the screws.
5. Attach the STACKER, C.
6. Close the STACKER, C.
STACKER ASSY
Figure 4-61. Installing the STACKER, ASSY
Disassembly/Assembly Procedure (Group 1)
Revision C
Right rear
Right front
GUIDE, STACKER, RIGHT
139