Epson Stylus Pro 3800 Service Manual page 228

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
8. Loosen the three screws (A, B and C shown in
LEAF SPRING, LOCK, HEAD.
9. Slightly turn the head adjust lever upward and downward to correct the slant
of the print head.
In case of NG Pattern 1: turn the head adjust lever downward.
In case of NG Pattern 2: turn the head adjust lever upward.
10. Tighten the three screws loosened at
11. Click [Back] to go back to the previous screen and repeat
until the correct result is obtained.
ADJUSTMENT
Figure 5-24) that secure the
→ →
Step 8 in the order of A B C
Step 6 to Step 10
Standard Adjustment
C
A
Figure 5-23. Screws Securing the [LEAF SPRING, LOCK, HEAD]
Figure 5-24. Head Adjust Lever
Revision C
B
Head Adjust Lever
228