Monitor Images On A Cellular Phone/Mobile Terminal; Monitor Images On A Cellular Phone - Panasonic TC0938450-015CE Operating Instructions Manual

2 Monitor images on a cellular phone/mobile
terminal
2.1

Monitor images on a cellular phone

It is possible to connect to the unit using a cellular phone via the Internet and monitor images (JPEG only) from
the unit on the screen of the cellular phone. It is also possible to refresh images to display the latest image.
IMPORTANT

When the authentication window is displayed, enter the user name and password. The default user name
and password are as follows.

User name: admin

Password: 12345
To enhance the security, change the password for the user "admin". (section 11)

If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
Note

It is necessary to configure the network settings of the cellular phone in advance to connect to the Internet
and monitor images from the unit. (section 13)
Access to "http://IP address/mobile"
1.
cellular phone.

Images from the unit will be displayed.
A Manual Refresh/Auto Refresh

Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.

Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.

When the dial key "5" or the [Manual Refresh] button is pressed again, the refresh mode of the camera will
return to manual refresh.

2 Monitor images on a cellular phone/mobile terminal

or "http://Host name registered in the DDNS server/mobile" using a
*1
Operating Instructions 13