Configure The Schedule Settings Of The Ftp Periodic Image Transmission [Ftp Img. Trans.]; How To Set The Schedules - Panasonic TC0938450-015CE Operating Instructions Manual

Picture (Camera) mode VGA [16:9]

Default: VGA
13.7 Configure the schedule settings of the FTP
periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (section 6)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to
section 13.6 for further information about the settings relating to the FTP periodic image transmission.

13.7.1 How to set the schedules

Check the check box of the desired day of the week of "FTP image transmission schedule".
1.

The selected day of the week will be validated for the schedule.
To designate time, select the desired "hour" and "minute" from the pull-down menu.
2.
When not designating time, check the checkbox of "24h".
3.
Click the [Set] button after completing the settings.

The result will be displayed at the bottom of the window.
13 Configuring the network settings [Network]
Not supported by the Thermal Camera
Operating Instructions 87