Table of Contents
Advertisement
1 Monitor Images on a PC
When "On" is selected for "User auth.", the authentication window will be displayed before displaying live
images for the user name and password entries. The default user name and password are as follows:
User name: admin
Password: 12345
IMPORTANT
•
To enhance the security, change the password for the user name "admin". It is recommended to change this
password periodically.
•
When displaying multiple H.264 images on a PC, images may not be displayed depending on the
performance of the PC.
Note
•
The maximum number of concurrent access user is 14 including users who is receiving H.264 images and
users who are receiving JPEG images. Depending on the set values for "Bandwidth control(bit rate)" and
"Max bit rate (per client)", the maximum concurrent access number may be 14 or less users. When 14 users
are concurrently accessing, the access limit message will be displayed for users who subsequently attempt
to access. When "Multicast" is selected for "Transmission type" of "H.264", only the first user who accessed
to monitor H.264 images will be included in the maximum number. The second and subsequent users who
are monitoring H.264 images will not be included in the maximum number.
•
When "On" is selected for "H.264 transmission" (section 8.3), H.264 images will be displayed. When "Off" is
selected, a JPEG image will be displayed. It is possible to display a JPEG image even when "On" is
selected for "H.264 transmission". In this case, the refresh interval of JPEG images will be limited.
•
The refresh interval may become longer depending on a network environment, PC performance,
photographic subject, access traffic, etc.
<Refresh interval of JPEG images>
When "On" is selected for "H.264 transmission"
Max. 4.2 fps
When "Off" is selected for "H.264 transmission"
Max. 25 fps
8
Operating Instructions
Advertisement
Table of Contents
