Table of Contents
Advertisement
15 Maintenance of the unit [Maintenance]
15 Maintenance of the unit [Maintenance]
System log check, firmware upgrade, status check and initialization of the setup menu can be performed on this
page.
The "Maintenance" page has 4 tabs; the [System log] tab, the [Upgrade] tab, [Status] tab and the [Default reset]
tab.
15.1 Check the system log [System log]
Click the [System log] tab of the "Maintenance" page. (section 6)
Up to 100 system logs can be saved on the built-in memory of the unit. When the saved system logs have
reached the maximum number, the newer logs will overwrite the older system logs. In this case, the oldest log is
the first to be overwritten.
[No.]
The serial number of the system log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
Note
When "Off" is selected for "Time display format" on the [Basic] tab (section 7.1), time & date of logs will be
displayed in 24-hour format.
[Description]
The descriptions about the system log will be displayed. Refer to section 18 for further information about the
system logs.
15.2 Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (section 6)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for
further information about the firmware upgrade.
92
Operating Instructions
Advertisement
Table of Contents
