Table of Contents
Advertisement
15 Maintenance of the unit [Maintenance]
15.4 Reset the settings/Reboot the unit [Default
reset]
Click the [Default reset] tab of the "Maintenance" page. (section 6)
The settings and the HTML data of the unit can be initialized and reboot of the camera and unit can be
performed on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset. It
is impossible to operate the unit for about 3 minutes after the initialization.
[Load the default HTML files (setup menu).]
Click the [Execute] button to reset the HTML files to the default.
It is impossible to operate the unit for about 3 minutes after the initialization.
[Reset to the default and load the default HTML files.]
Click the [Execute] button to reset the settings of the unit and the HTML files to the default. Note that the
network settings will not be reset.
It is impossible to operate the unit for about 3 minutes after the initialization.
[Camera restart]
This feature is not supported by the Thermal Camera.
[Unit restart]
Click the [Execute] button to reboot the encoder. It is impossible to operate the unit for about 2 minutes after
rebooting the unit.
Operating Instructions
95
Advertisement
Table of Contents
