Panasonic TC0938450-015CE Operating Instructions Manual page 55


Synchronization with NTP server: Time automatically adjusted by synchronizing with the NTP server
will be used as the standard time of the unit.

Default: Manual
[NTP server address setting]
When "Synchronization with NTP server" is selected for "Time adjustment", select the method of how to obtain
the NTP server address from the following.

Auto: Obtains the NTP server address from the DHCP server.

Manual: The NTP server address will be entered manually on "NTP server address".

Default: Manual
IMPORTANT

When obtaining the NTP server address from the DHCP server, it is necessary to select "DHCP",
"Auto(AutoIP)", or "Auto(Advanced)" for "Network Settings" on the [Network] tab of the "Network" page.
(section 13)
[NTP server address]
When "Manual" is selected for "NTP server address setting", enter the IP address or the host name of the NTP
server.

Available number of characters: 1 - 128 characters

Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).

Default: None (blank)
IMPORTANT

When entering the host name for "NTP server address", it is necessary to configure the DNS settings on
the [Network] tab of the "Network" page. (section 13)
[NTP port]
Enter a port number of the NTP server.

Available port number: 1 - 65535

Default: 123
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.

Default: 1h
[Time zone]
Select a time zone corresponding to the location where the unit is in use.

Default: (GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
12 Configure the settings of the servers [Server]
Operating Instructions 55