Panasonic TC0938450-015CE Operating Instructions Manual page 47

[Additional alarm area data(VMD)]
Determine whether or not to send notifications for the alarm area number of VMD alarm with the Panasonic
alarm protocol by selecting On/Off.

Default: Off
[Destination port]
Select a destination port for the Panasonic alarm protocol from the following.

Available range: 1 - 65535

Default: 1818
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Retry times]
Select a retry time for the Panasonic alarm protocol.

Available range: 0-30

Default: 2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Host name is
unavailable for the IP address. Up to 8 destination server addresses can be registered.

[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be sent when
an alarm occurs or when a video loss is recovered.

[Destination server address]: Enter the destination server address or host name.
–
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
–
Default: None (blank)
To delete the registered destination server address, click the [Delete] button respective to the desired
destination server address.
IMPORTANT

When entering the host name of the "Destination server address", the DNS settings on the [Network] tab of
the "Network" page must be configured. (section 13)

Confirm that the destination IP addresses are registered correctly. When a registered destination does not
exist, notification may be delayed.
10 Configure the alarm settings [Alarm]
Operating Instructions 47