Panasonic TC0938450-015CE Operating Instructions Manual page 15

Note

It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the unit. (section 13)
Access to "http://IP address/cam"
1.
mobile terminal.
 Images from the unit will be displayed.
A Live images area
Displays images from the camera.
B Resolution control
The resolution can be changed by selecting a resolution setting from the buttons.
Picture (Camera) mode VGA [4:3]
Picture (Camera) mode VGA [16:9]
Note

You can change the image size displayed on the mobile terminal by accessing the following addresses.
 Large display: http://IP address/cam/dl
 Medium display: http://IP address/cam/dm
 Small display: http://IP address/cam/ds

The pan/tilt/zoom/focus functions of cameras connected to the unit cannot be operated from mobile
terminals.

When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.

When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/ cam"
in the address box of the browser. When using the DDNS function, access to "http://Host name registered
in the DDNS server: (colon) + port number/cam"

When "HTTPS" is set in "HTTPS" - "Connection" on the [Network] tab of the "Network" page, enter the
following:

"https://IP address: (colon) + port number/cam" or "https://Host name registered in the DDNS server:
(colon) + port number/cam".

When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
2 Monitor images on a cellular phone/mobile terminal
or "http://Host name registered in the DDNS server/cam"
*1
320x240/640x480 (default)
Not supported by the Thermal Camera
*2 .
*2 using a
*1
Operating Instructions 15