Table of Contents
Advertisement
8 Configure the settings related to images [Image]
8 Configure the settings relating to images
[Image]
The JPEG and H.264 image settings and settings relating to image quality and RS485 can be configured on this
page.
The "Image" page has 3 tabs; the [JPEG/H.264] tab, the [Image/Position] tab and the [RS485] tab.
8.1
Configure the settings relating to the Picture
(Camera) mode/Video input [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image" page. (section 6)
[Video input]
This value must be set to NTSC on the Thermal Camera
[Picture (Camera) mode]
This value must be set to VGA (4:3) on the Thermal Camera
8.2
Configure the settings relating to JPEG
images [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image" page. (section 6)
JPEG
Configure the settings such as "Refresh interval (JPEG)*", "Image capture size" and "Image quality" on this
section. Refer to section 8.3 for further information about the settings relating to H.264 images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images displayed on the "Live" page.
30
Operating Instructions
Advertisement
Table of Contents
