Using The Ip Setting Software - Panasonic TC0938450-015CE Operating Instructions Manual

17 Using the IP Setting Software

It is possible to perform the network settings of the unit using the "IP Setting Software" which can be
downloaded from the following address:

http://security.panasonic.com/pss/security/library/tools.html#setup
When using multiple units, it is necessary to configure the network settings of each unit independently. If the
Panasonic "IP Setting Software" does not work, access the "Network" page from the setup menu of the unit in the
browser and perform settings separately. (section 13)
IMPORTANT

When using Windows 7 or Windows Vista, the "Windows Security Alert" window may be displayed when
starting the "IP Setting Software". In this case, disable "User Account Control" from the control panel.

Panasonic "IP Setting Software" is inoperable in other subnets via the same router.

This unit cannot be displayed or set with an older version of the "IP Setting Software" (version 2.xx).

Due to security enhancements in "IP Setting Software", "Network Settings" of the unit to be configured
cannot be changed when around 20 minutes have passed after turning on the power of the unit. (When the
effective period is set to "20min" in the "Easy IP Setup accommodate period".) However, settings can be
changed after 20 minutes for units in the initial set mode.
To start the Panasonic "IP Setting Software", double-click the EasyIpSetup.exe file downloaded from the link
1.
above

The License Agreement will be displayed. Read the Agreement and choose "I accept the terms in the
license agreement", and click [OK].

The "IP Setting Software" screen is displayed. If a unit is found, information about it, such as the MAC

address and IP address, is displayed.
2.
Click the [Access Camera] button after selecting the MAC address/IP address of the unit to be configured.
Note

When using a DHCP server, the IP address assigned to the unit can be displayed by clicking the [Search]
button of the "IP Setting Software".

When duplicate IP addresses are used, the number of the unit with the duplicate address is displayed in
overlap.

It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in
accordance with the protocol in use.

The information displayed can be sorted by clicking the title of each displayed item.

When the [Network Settings] button is clicked, the "Network Settings" screen is displayed and network
settings can be changed.
The viewer software "Network Camera View 4S" must be installed in order to view images. Follow the on-
3.
screen instructions to install the software.

The "Live" page of the unit is displayed.
17 Using the IP Setting Software
Operating Instructions 97