Table of Contents
Advertisement
9 Configure the multi-screen settings [Multi-
screen]
Network cameras and units used to display images on a multi-screen can be registered on the
"Multi-screen" page. (section 6)
[IP address]
Enter the IP address or the host name of the unit or network camera to be used for the multi-screen. 4 cameras
can be registered as a group and up to 4 groups (16 cameras) can be registered.
When the HTTP port number for the unit or network camera of which images are to be displayed had been
changed, enter as follows:
Example of entry:
Example when entering an IPv4 address: http://192.168.0.10:8080
Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080
To access the units using the HTTPS protocol, enter as follows:
Example of entry: https://192.168.0.10/
Available number of characters: 1 - 128 characters
Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registered
9 Configure the multi-screen setting [Multi-screen]
Operating Instructions
37
Advertisement
Table of Contents
