Panasonic KX-TVP150 User Manual page 31

2.2.3 Connecting a Data Terminal or a
Printer to the VPS
Printer Connection
1
Make cables so that the printer may be connected to the
KX-TVP150 as shown in the chart. Cables must be
shielded and the maximum length is 6.5 feet.
Connection Chart:
KX-TVP150 RS-232C
Printer RS-232C
Pin Signal Circuit
No. Name
Type
@IA)
1 FG AA
3 RXD BB
2 TXD BA
1
20 DTR CD
7 SG Al3
5 CTS CB
6 DSR cc
8 DCD CF
'
Circuit Circuit
Type Type
WV WV
Signal Signal
Name Name
Pin Pin
No. No.
AA
BA
FG FG
TXD TXD
I
BB
CB
RXD RXD
CTS CTS
DSR DSR
SG SG
IL
-E
6 6
7 7
I
i CD CD
DTR DTR 20 20
@Panasonic data terminal:
KX-D49 1 OD, KX-D49 11, KX-D4920, KX-D4985,
etc.
If you connect this unit to a Panasonic Data Termi-
nal, the Communication Parameter Transmit XONI
XOFF on the Data Terminal must be set to the
"YES" position.
For further details, see the Operating Instructions for
the Data Terminal.
When using special accessories such as a cable, the user
should use those specified in this installation manual to
comply with the limits for a Class A computing device
pursuant to Sub-part J of Part 15 of FCC Rules.
M-2-18
Configuration & Installation
Manager 's Guide