ABB ScreenMaster RVG200 Operating Instructions Manual page 112

ScreenMaster RVG200
Paperless recorder
Count range
Preset count
Predetermined count
Intermediate count
Log update
Log update time
110
Set the value the F value calculation counts from and the value applied
0
when the F count is reset.
0
Set the value at which the F
Note.

The
Preset count
value.

Set the required number of decimal places on the
value.
count
Set the value at which a digital source is activated. This can be used as an
alarm threshold to indicate when the
be reached.
Select the frequency with which F
Log update time Log updated every...
5, 10, 15,
5, 10, 15, 30... seconds past the hour
30, 60, 90 secs
3 min 0, 3, 6, 9... minutes past the hour
5 min 0, 5, 10, 15... minutes past the hour
10 min 0, 10, 20, 30,... minutes past the hour
15 min 0, 15, 30, 45 minutes past the hour
20 min 0, 20, 40 minutes past the hour
30 min 0, 30 minutes past the hour
60 min On the hour
2 hrs Midnight, 2am, 4am,...
3 hrs Midnight, 3am, 6am,...
4 hrs Midnight, 4am, 8am,...
8 hrs Midnight, 8am, 4pm,...
12 hrs Midnight, 12am
24 hrs Midnight
count stops or wraps.
0
value must be lower than the
Predetermined count
values are added to the Totalizer log.
0
7 Configuration
Predetermined count
Predetermined
value is about to
OI/RVG200-EN