ABB ScreenMaster RVG200 Operating Instructions Manual page 150

ScreenMaster RVG200
Paperless recorder
Source Name
Count pulse 1A to 24B
Logic equation 1 to 24
Any Electronic Signature
Batch Power Failure Abort
Group Batch Running
Hybrid Dgtl I/P C1 to D5
Arc media present
Archive on-line
Table A.1 Signal sources (Continued)
148
Totalizer count pulse.
Active for 100 ms each time the totalizer updates by one whole count. For example, if
two decimal places are set, a pulse is generated when the totalizer value increments
from 0.99 to 1.00 or 1.99 to 2.00
Available only if the totalizer option is enabled and the relevant totalizer is enabled
during configuration.
Logic equation result.
Available only if the Math and Logic option is enabled and the relevant logic equation is
enabled during configuration.
On signal pulse after power up.
On signal while running.
Digital input states.
Digital signals received from hybrid modules fitted at module positions C and D.
Available only if the module is fitted.
Active when the removable archive media is present.
Active when archiving is in progress.
Appendix A – Signal sources
Description
OI/RVG200-EN