Common Configuration; Setup - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.7 Common configuration

Fig. 7.8 Selecting common configuration

7.7.1 Setup

Setup
Number of groups *
Channel Allocation *
Language
Global alarm ack source
* If this parameter is changed, internally-recorded data files are recreated and unarchived data is lost.
68
Select the number of process groups required.
Select the recording channels to assign to each group.
Note.

Each recording channel can be assigned to one group only.

Channels can be assigned to groups in any order.
Select the language to be used to display standard user prompts and
menu items.
Note. A new language selection does not take effect until the
configuration is saved.
Select a signal source used to acknowledge all active alarms in both
Process Groups simultaneously. Refer to Appendix A, page 146 for a
description of the available sources.
Note. This signal is edge-triggered. A rising edge (inactive to active) or
falling edge (active to inactive) triggers global alarm acknowledgement.
7 Configuration
OI/RVG200-EN