ScreenMaster RVG200
Paperless recorder
ACJC Type
Electrical range low
Electrical range high
OI/RVG200-EN
Note. This parameter is displayed only if Type has been set to
Thermocouple.
Select the automatic cold junction compensation required:
Per Module
–
the recorder automatically detects an automatic cold
junction device on another channel on the same
module.
Per Channel
–
an automatic cold junction device must be fitted to the
channel.
External
–
the automatic cold junction will be read from the
configured analog signal.
Note. These parameters are displayed only if
millivolts, milliamps, Volts or Resistance.
Set the required electrical range.
The range of the electrical input signal is determined by the input type –
see Table 7.2:
Input
type
mV
Minimum
–150
Maximum
150
Table 7.2 Limits of electrical ranges
7 Configuration
has been set to
Type
Standard inputs
V
mA
–10
0
25
50
0
10000
91