ABB ScreenMaster RVG200 Operating Instructions Manual page 77

ScreenMaster RVG200
Paperless recorder
Note. The following parameters:

are displayed only if

can be changed only by the System Administrator (User 1).
Reconfigure preset
Password expiry
Inactive user disabling
Password failure limit
Min password length
OI/RVG200-EN
is set to Advanced.
Security system
Passwords are entered initially by the System Administrator but,
subsequently, any user can change their own password. When this
parameter is set to Yes, each user must change their password after it is
used for the first time following initial configuration – see also Section
7.7.6, page 76.
Enter the time period after which all passwords expire. After this period of
time, all users must change their passwords.
Enter the time period after which an inactive user's access privileges are
de-activated. A user is considered inactive if their password has not been
used. A user is de-activated by removal of their access privileges and can
be re-activated only by the System Administrator (User 1).
Enter the number of consecutive incorrect password entries allowed by a
user. If the number of incorrect entries exceeds this limit, the user's
access privileges are de-activated and can be reinstated only by the
System Administrator (User 1).
Passwords have a maximum length of 20 characters. Enter the minimum
length required for all new passwords.
7 Configuration
75