ABB ScreenMaster RVG200 Operating Instructions Manual page 120

ScreenMaster RVG200
Paperless recorder
FTP
FTP user 1 (to 4)
User name
Password
Access Level
Remote Operation
118
The FTP User name and password are used during logon to access the
FTP server. Access for up to four different users is provided. These
passwords can also be used to allow access to the functionality provided
by the web server.
Enter a name for the user granted FTP access.
Enter a password for the user granted FTP access.
Select an FTP access level for the user:
Full – user can read, write and delete files.
Read-only – user can read files only.
Select an access level for Remote Operation by the user from the
webserver:
None – user cannot log on to the recorder from a web
browser.
Operator – user can acknowledge alarms and start, stop and
reset totalizers from a web browser.
Configuration – user can load a new configuration into the recorder
from a web browser. This is in addition to the operator
functions.
Note. If a user is given full access via FTP, that user is able to delete both
data and configuration files. This could result in erroneous operation of the
recorder.
7 Configuration
OI/RVG200-EN