Ec Directive 89/336/Eec; End-Of-Life Disposal; Cleaning; Symbols - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

1.5 EC Directive 89/336/EEC

Electrical – In order to meet the requirements of the EC Directive 89/336/EEC for EMC regulations, this
product must not be used in a non-industrial environment.

1.6 End-of-life disposal

The recorder contains a small lithium battery that must be removed and disposed of
responsibly in accordance with local environmental regulations.
The remainder of the recorder does not contain any substance that causes undue harm to
the environment and must be disposed of in accordance with the Directive on Waste
Electrical and Electronic Equipment (WEEE). It must not be disposed of in Municipal Waste
Collection.

1.7 Cleaning

The complete recorder can be hosed down if it has been installed to IP66 / NEMA 4X standards – see
Section 3.1, page 10. Warm water and a mild detergent can be used.

1.8 Symbols

Symbols that appear on this product are shown below:
Functional earth (ground) terminal.
Alternating current supply only.
Direct current supply only.
This symbol, when noted on a product, indicates a potential hazard which could cause
serious personal injury and / or death.
The user should reference this instruction manual for operation and / or safety information.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical
shock and / or electrocution exists and indicates that only individuals qualified to work with
hazardous voltages should open the enclosure or remove the barrier.
The equipment is protected through double insulation.
Recycle separately from general waste under the WEEE directive
6
1 Health & Safety
OI/RVG200-EN