ABB ScreenMaster RVG200 Operating Instructions Manual page 43

ScreenMaster RVG200
Paperless recorder
Goto
Oldest data in internal memory
Touch and hold to adjust
each element of the
'goto' target date and
time individually
Touch to discard changes
and return to Chart view
Select Batch
OI/RVG200-EN
Touch to move to data stored in the recorder's onboard memory that was
recorded at a specific date and time.
Select Review Time
Start
17/07/13 11:24:28
Daylight Saving
Touch to open calendar to
enable fast date selection
Note.

If daylight saving is enabled (see Section 7.7.4, page 72)
selected Goto target date / time is within the daylight saving period,
'Daylight Saving' is displayed on the dialog box.

Once internal memory becomes full, the oldest data is overwritten by
the newest data. If historical review has been selected for some time,
the oldest data present may no longer be available.

The recorder exits historical review mode automatically after 15
minutes if the screen is not touched.
Select to move to data recorded in the recorder's onboard memory for a
specific batch – see Appendix E.2.4, page 176.
End
Newest data in internal memory
18/07/13 13:58:15
Adjust the slider
to adjust the
'goto' target date and time
Displayed if selected 'goto'
target date/time is within
daylight saving period
Touch to accept changes
and return to Chart view
4 Operation
the
and
41