ABB ScreenMaster RVG200 Operating Instructions Manual page 48

ScreenMaster RVG200
Paperless recorder
Input Adjust
Note. All totalizer menu items are greyed-out if the totalizer software option is not enabled.
Totalizer Stop / Go
Indicator and overview
display views only
Totalizer Reset
Indicator and overview
display views only
Show Statistics
Show Totalizers
Indicator and overview
display views only
Show Totalizer Values
Show Channel Value
Indicator and overview
display views only
46
Note. Displayed only if Operator Calibrate on one of the Analog I/P
configuration tabs is set to On – see page 113.
Touch to manually fine-tune inputs to remove process offset errors or
system scale errors for the selected input.
Note. Greyed-out if the relevant Totalizer stop / go menu enable is not
selected – see page 84.
Touch to stop and start individual totalizers.
Note. When a totalizer is not running (Stop has been selected), the
corresponding totalizer value is shown in red.
Note. Greyed-out if the relevant Totalizer reset menu enable is not
selected – see page 84.
Touch to reset the totalizer value to the totalizer preset value.
Note. Greyed-out if the Show totalizers / statistics menu enable is not
selected – see page 84.
Touch Show Statistics / Show Totalizers to toggle between the totalizer
value display and totalizer statistics display (totalizer maximum, minimum
and average values).
If both totalizers on one channel are enabled and:

Show Totalizers is selected – the tag, current value and units for
both totalizers are displayed together in the channel's indicator.

Show Statistics is selected – the tag, units, maximum, minimum
and average values for each totalizer are displayed in turn for 5
seconds in the channel's indicator.
Touch Show Totalizer Values / Show Channel Value to toggle between the
totalizer value display and instantaneous channel value display.
Note. Greyed-out when more than 6 channels are displayed.
4 Operation
OI/RVG200-EN