ScreenMaster RVG200
Paperless recorder
7.3 Configuration level access
To configure the recorder when
protected:
1. Access the Configuration level – see Figs. 7.1 and 7.2, pages 60 and 61 respectively.
2. Make changes to parameters as detailed in Figs 7.5 and 7.6 (pages 64 and 65 respectively).
To configure the recorder when
1. Set the internal security switch to the 'Configuration level not protected' position – see Fig. 7.3,
page 62.
2. Access the Configuration level – see Figs. 7.1 and 7.2, pages 60 and 61 respectively.
3. Make changes to parameters as detailed in Figs 7.5 and 7.6 (pages 64 and 65 respectively).
(see Section 7.2, page 59)
Configuration level
unprotected
(see Section 7.2, page 59)
Continued in Fig. 7.2 on next page
Fig. 7.1 Accessing the configuration level
60
Configuration security
Configuration security
Configuration level
protected
is set to the factory default setting of Password
is set to Internal switch protected:
Displayed only if
is set to
Security system
Basic – see
Section 7.7.5, page 74
7 Configuration
Invalid password
entered
Displayed only if
is set to
Security system
Advanced – see
Section 7.7.5, page 74
Valid password
OI/RVG200-EN
entered