User Guide: PTP 800 Licensed Ethernet Microwave
Mounting antenna and flexible waveguide
The flexible waveguide is designed to isolate vibration and eliminate difficulties
caused by misalignment.
When installing flexible waveguides, conform to the bend radii, maximum twist and
torque settings, as specified in
Assembling the flexible waveguide hangers
To provide adequate support for a 900mm flexible waveguide, two hangers are
required.
To assemble the flexible waveguide hangers, proceed as follows:
Procedure 5-7 Assemble flexible waveguide hangers
1
Check the flexible waveguide hanger kit contents.
Assemble the pole clip, making note of the angle of the slots in the
2
metal strip.
phn-1478_005v000
Apr 2010
Flexible waveguide specifications
Remote mounting of antenna and ODU
on page 4-23.
5-43