Table of Contents
Advertisement
User Guide: PTP 800 Licensed Ethernet Microwave
Table 6-19 Manual clock attributes
Attribute
SNTP State
Set Time
Set Date
Time Zone
Daylight Saving
Setting the real-time clock to synchronize using SNTP
To set the CMU clock to obtain accurate date and time updates from a networked
time server, proceed as follows:
Procedure 6-27 Set the real-time clock using SNTP
1
From the left hand menu, select Remote Management. The Remote
Management page is displayed
2
In the Clock section of the page, set the SNTP State attribute to Enabled.
The SNTP clock attributes are displayed
3
Review and update the SNTP clock attributes
4
Select Submit Updated Configuration.
phn-1478_005v000
Apr 2010
'Disabled' means that the CMU will keep time without
connecting to a networked time server.
Set hours, minutes and seconds.
Set year, month and day.
Set the time zone offset from Greenwich Mean Time
(GMT).
'Disabled' means that daylight saving adjustments will
not be applied to the time.
'Enabled' means that daylight saving adjustments will be
applied to the time, according to local rules.
(Figure
Meaning
6-22).
(Figure
6-26).
(Table
6-20).
Managing faults
6-53
Advertisement
Table of Contents
