Figure 5-11 Cmu With Rack Mount Kit And Blanking Plate; Figure 5-12 Cmu Mounted In Rack - Motorola PTP 800 User Manual

User Guide: PTP 800 Licensed Ethernet Microwave
Rack mounting
A rack mounting kit allows one or two CMUs to be installed in a 19 inch cabinet
rack (Figure 5-11
securing screws.

Figure 5-11 CMU with rack mount kit and blanking plate

Figure 5-12 CMU mounted in rack

CAUTION
NOTE
phn-1478_005v000
Apr 2010
and Figure
To avoid damaging the RF cable, route it in such a way that the minimum
bend radius for the selected cable is always exceeded.
If cables are laid in an air-handling cavity, they must be Plenum rated.
A right angle IF cable connector (Andrew Antenna part number 400PNR-
CS8) can make it easier to install the CMU in the rack
5-12). The kit contains a blanking plate and CMU
Installing the CMU
(Figure 5-13).
5-73