Table of Contents
Advertisement
User Guide: PTP 800 Licensed Ethernet Microwave
5
Fit the remote mount to the tower. Fit an 'O' ring seal to the antenna
interface and secure the plain flange of flexible waveguide to the
antenna. Ensure that the waveguide cavity orientation matches the
opening in the antenna. Secure the flexible waveguide using four of
the shorter screws to the antenna. Fit each screw with a spring
washer and a plain washer.
Fit the rubber inserts from the hanger kit to the flex waveguide.
6
Insert the rubber insert and flex waveguide into the hanger.
7
phn-1478_005v000
Apr 2010
Remote mounting of antenna and ODU
5-47
Advertisement
Table of Contents
