Table 6-17 Diagnostic Alarms - Motorola PTP 800 User Manual

Managing faults

Table 6-17 Diagnostic alarms

Alignment mode
Unit Out Of Calibration
Encryption Enabled
Mismatch
Wireless link disabled
warning
Data port disabled
warning
Data port fiber status
Data port configuration
mismatch
SNTP Synchronization
Failed
Management port
disabled warning
Data port configuration
mismatch
ODU Status
Wireless link status
6-48
Alarm
The CMU is in alaignment mode
The unit is out of calibration and must be returned to the
factory using the RMA process for re-calibration.
Encryption has been enabled on one end of the wireless
link but not the other. For more information, see
Enabling AES encryption
The wireless link has been disabled by means of the
SNMP MIB.
The fiber and copper data port has been disabled by
means of the SNMP MIB.
A change in status at the fiber data port.
The Ethernet configuration of the data port is not
compatible with the connected network equipment.
SNTP has been enabled but the unit is unable to
synchronize with the specified SNTP server.
The management port has been disabled by means of the
SNMP MIB.
The Ethernet configuration of the management port is
not compatible with the connected network equipment.
The status of the ODU.
The status of the end-to-end wireless link.
Chapter 6 Operation
Definition
on page 6-38.
phn-1478_005v000
Apr 2010