Managing performance
Figure 6-29 Generate Downloadable Diagnostics page
Changing the diagnostics refresh period
Perform this task to change the frequency with which the Diagnostics Plotter page
is refreshed.
The default refresh period is 3600 seconds (1 hour). If a much shorter refresh
period is selected, for example 60 seconds, it is possible to monitor the
performance of an operational PTP 800 link in real time.
To change the diagnostics refresh period, proceed as follows:
Procedure 6-32 Change the diagnostics refresh period
1
From the left hand menu, select Diagnostics. The Diagnostics Plotter page
is displayed
2
Enter the required refresh frequency in the Page Refresh Period attribute.
6-62
(Figure
6-28).
Chapter 6 Operation
phn-1478_005v000
Apr 2010